1.75mm Matt PLA - Gunmetal Grey Camouflage
- Good surface quality
- Rough and matt surface finish with excellent detail
- Easy to print at high printing speeds
- Warp-free printing and improved flowing behaviour
- Excellent first layer adhesion to several (un)heated print surfaces
- Compatible with AquaSolve PVA
- Wide variety of matt PLA colours
Complex educational projects and models
Manufacturing and visualization aids
Matt PLA is modified with fillers that can have an abrasive effect on brass nozzles. We recommend using hardened steel nozzles when 3D printing with Matt PLA.
General printing guidelines *
|Nozzle size: ≥ 0.15mm||Layer height: ≥ 0.10mm||Experience level: Beginner|
|Print temp: ± 215 - 230° C||Fan speed: 50-100%|
|Heat bed: ± 0 - 60° C||Enclosure needed: No|
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There is a lot of different type of printers, hot-ends and printer offset that it is complicated to give an overall one-size-fits-all setting.
|ρ: 1.24 g/cc||50 gr coil||0.75 Kg spool||2.3 Kg spool||4.5 Kg spool||8 Kg spool|
|Ø 1.75mm||± 15.1m||± 226m||± 693m||± 1356m||± 2410m|
|Ø 2.85mm||± 5.7m||± 85m||± 261m||± 511m||± 909m|
Product export information
|HS Code: 39169090||Description: Monofilament||Country of origin: the Netherlands|
This filament is compliant to below-listed directives and regulations.
RoHS directive 2011/65/EC
REACH directive 1907/2006/EC
*) This declaration of conformity to guidelines and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.