1.75mm ReForm™ - rPLA - White
ReForm is a sustainable initiative within Formfutura to efficiently manage residual extrusion waste streams and re-use them into high-end upcycled filaments. The ideology behind ReForm is to make 3D printing more sustainable – without having to make compromises on material properties – and yet keep it affordable.
ReForm rPLA is based on exactly the same unique formulation as our EasyFil PLA range but is made out of residual extrusion waste streams which are re-compounded and homogenized into a high-end and easy to print upcycled PLA filament with significantly less environmental impact.
Unique features
- 100% upcycled/recycled filament with retaining the unique easy-to-print characteristics of EasyFil PLA
- Less environmental impact by quality controlling and re-using extrusion waste streams
- Only residual waste streams of EasyFil PLA is being re-used, thus pure quality!
- ReForm filaments are spooled on easy to recycle and dispose of recycled cardboard spools
- ReForm filament is packaged in recycled carton boxes
- Warp-free printing and no deformation after cooling
- Improved flowing behaviour and inter-layer adhesion
- Good first layer adhesion to several (un)heated print surfaces
- Sustainable packaging
- Biodegradable
- Very easy to print
General printing guidelines *
Nozzle size: ≥ 0.15mm |
Layer height: ≥ 0.1mm |
Flow rate: ± 100% |
Print temp: ± 200 - 230° C |
Print speed: Medium |
Retraction: Yes ± 5mm |
Heat bed: ± 0 - 60° C |
Fan speed: 50-100% |
Experience level: Beginner |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
ρ: 1.24 g/cc |
50 gr coil |
1 Kg spool |
Ø 1.75mm |
± 16.8m |
± 335m |
Ø 2.85mm |
± 6.3m |
± 126m |
Product export information
HS Code: 39169090 |
Description: Monofilament |
Country of origin: the Netherlands |
Compliance *
This filament is compliant to below-listed directives and regulations.
- RoHS directive 2011/65/EC
- REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.