1.75mm ReForm rTitan - Black

1.75mm ReForm rTitan - Black

Kaubamärk:
Tootekood: 8718924478622
Ühik: tk 1000g
Tarneaeg: 8 päeva
Hind: 34,16 €
   

ReForm is a sustainable initiative within Formfutura to efficiently manage residual extrusion waste streams and re-use them into high-end upcycled filaments. The ideology behind ReForm is to make 3D printing more sustainable – without having to make compromises on material properties – and yet keep it affordable.
ReForm rTitan is based on exactly the same unique formulation as our TitanX filament range but is made out of residual extrusion waste streams which are re-compounded and homogenized into a high-end, and FDM/FFF-optimized upcycled TitanX-based filament with significantly less environmental impact.

 

Unique features

  • 100% upcycled/recycled filament with retaining the unsurpassed printing properties of TitanX
    • Less environmental impact by quality controlling and re-using extrusion waste streams
    • Only residual waste streams of TitanX is being re-used, thus pure quality!
  • Sustainable packaging
    • ReForm filaments are spooled on easy to recycle and dispose of recycled cardboard spools
    • ReForm filament is packaged in recycled carton boxes
  • FDM/FFF-optimized
    • Warp-free printing
    • Optimized filament flowing behaviour and inter-layer adhesion
    • Excellent adhesion to the heated glass plate, Kapton tape, PET tape and Formfutura EasyPad
  • Greatly improved mechanical properties, strength, and impact resistance

 

General printing guidelines *

Nozzle size: ≥ 0.15mm

Layer height: ≥ 0.1mm

Flow rate: ± 106%

Print temp: ± 240 - 265° C

Print speed: Medium

Retraction: Yes ± 5mm

Heat bed: ± 80 - 90° C

Fan speed: 0-30%

Experience level: Beginner / Intermediate

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There is a lot of different type of printers, hot-ends and printer offset that it is complicated to give an overall one-size-fits-all setting.

 

Filament length

ρ: 1.10 g/cc

50 gr coil

1 Kg spool

Ø 1.75mm

± 18.9m

± 378m

Ø 2.85mm

± 7.1m

± 143m

 

Product export information

HS Code: 39169090

Description: Monofilament

Country of origin: the Netherlands

 

Compliance *

This filament is compliant to below-listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.