2.85mm ABSpro™ Flame Retardant - Black

2.85mm ABSpro™ Flame Retardant - Black

Kaubamärk: Formfutura
Tootekood: 8718924475546
Ühik: tk 500g
Tarneaeg: 3 päeva
Hind: 37,50 €
Kogus: tk 500g Lisa korvi

ABSpro – Flame Retardant on halogeeni vaba professionaalne 3D-printeri long, mis on disainitud vastavalt standardile UL 94 V-0.

 

 

ABSpro - Flame Retardant is a professional, halogen free, self-extinguishing filament which is engineered to meet the UL 94 V-0 flammability standards, meaning that the vertical burning of the filament, or 3D printed object, stops within 10 seconds. 
The mixture used for our ABSpro - Flame Retardant Black compound contains a high percentage of PolyCarbonate, ABS and added halogen-free flame retardant modifiers. Even though the compound contains a high percentage of PolyCarbonate, the flame retardant modifiers allows the filament to be printed at relatively low temperatures.

 

Unique features

  • Self-extinguishing flammability properties
  • Engineered to meet UL 94 V-0 standards *
  • Excellent dimensional stability
  • Superb interlayer adhesion
  • Halogen free
  • High gloss

*) ABSpro Flame Retardant filament is engineered to meet the UL 94 V-0 flammability standards. The ABSpro Flame Retardant material/filament thus meets the UL 94 V-0 standards based on the internal test procedure, which can be found in the documentation tab of this page. The filament is not certified by Underwriters Laboratories itself and therefore does not have an UL number. Testing procedures have been performed in house.

 

General printing guidelines *

Nozzle size: ≥ 0.15mm

Layer height: ≥ 0.1mm

Flow rate: ± 100%

Print temp: ± 240 - 260° C *

Print speed: Medium

Retraction: Yes ± 5mm

Heat bed: ± 110 - 120° C *

Fan speed: 0-25%

Experience level: Expert

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

*) Because of the relative high percentage of added PolyCarbonate, ABSpro - Flame Retardant has a tendency to warp and therefore it is recommended to use a temperature-controlled build chamber and to prepare your heat bed with DimaFix fixative spray when 3D printing large(r) scaled objects with ABSpro - Flame Retardant.

 

Filament length

ρ: 1.18 g/cc

50 gr coil

0.5 Kg spool

Ø 1.75mm

± 17.6m

± 176m

Ø 2.85mm

± 6.6m

± 66m

 

Product export information

HS Code: 39169090

Description: Monofilament

Country of origin: the Netherlands

 

Compliance *

This filament is compliant to below listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.